Tecma · Marine toilet
Tecma electric toilets
Tecma toilets are vitreous-china marine toilets from Italy (Tecma S.r.l. in Otricoli, ceramics from the Civita Castellana district), sold today by Thetford Marine. The macerator pump sits in the base: steel blades in a chamber ahead of the impeller grind the waste and pump it to the holding tank, while a solenoid valve on the pressurised fresh-water system or a separate inlet pump for sea water fills the bowl. The Flexi line for 50–100 ft boats is built around the Silence Plus 2G (big bowl) and Elegance 2G (small bowl), each also as a Short for a 10 cm step and the Elegance as a Cut for an angled wall, and runs on the MAC 11 pump (T-PF.P01A 12 V, T-PF.P01B 24 V), like the Design line (X-Light, Evolution, Breex); the Compact line for 20–50 ft (Nano and Compass High/Short, also as Eco with a rocker switch, in North America also the EasyFit) uses the smaller MAC 4. The second generation replaced the first Flexi line (Silence Plus, Elegance, Elegance Cut, Prestige, Saninautico) in 2016–2017 with the same footprint and outer dimensions, but its internal hoses and floor brackets do not fit the older toilets. There is no seal kit to renew as on piston-pump heads: Tecma suggests carrying a spare pump of the right voltage, the rubber hose kit (T-PF.P50-2G on the 2G), a solenoid valve or inlet pump and a control panel.
- Manuals & documents
- Wear parts & part numbers
- Service intervals
- Specifications
- Good to know
- Videos & how-tos
- On the marketplace
Manuals & documents
The manuals are Thetford Marine’s own PDFs, which thetfordmarine.com serves from its Dropbox; the links open them directly. The North American Tecma manuals linked from the US site have been removed there, and the spares list for the first-generation Flexi line is no longer online. One link leads to a US parts dealer with the North American numbers. We host no manuals or drawings.
- Design & Flexi line (Silence Plus 2G, Elegance 2G, X-Light, Evolution, Breex): installation and user manual with spare parts and seat codes, rev. V08 Operation manual dropbox.com · PDF · IT · EN · DE · FR
- Compact line SFT (Nano, Compass): installation and user manual, rev. V04 Operation manual dropbox.com · PDF · IT · EN · DE · FR
- Compass High and Short Eco: owner’s and installation manual with troubleshooting Operation manual dropbox.com · PDF · IT · EN · FR · ES · DE
- Thetford Marine catalogue 2025: data, dimensions and weights of every Tecma toilet, panels, sensors, pumps Brochure dropbox.com · PDF · EN · IT
- How it works & manuals: Design and Flexi line Manual portal thetfordmarine.com · EN
- How it works & manuals: Compact line (Nano, Compass) Manual portal thetfordmarine.com · EN
- Service information: first-generation Flexi line and discontinued control panels Manual portal thetfordmarine.com · EN
- Tecma FAQ: Flexi 1G vs 2G, spares on board, hoses, cleaning Servicing guide thetfordmarine.com · EN
- Tecma tips: replacing obsolete control panels, odours, flushing Servicing guide thetfordmarine.com · EN
- Tecma Silence Plus parts with North American numbers (Fisheries Supply) Parts shop fisheriessupply.com · EN
Wear parts & part numbers
| Part | OEM number | Also fits | Note |
|---|---|---|---|
| Pump assembly | T-PF.P01A · T-PF.P01B1 | — | MAC 11 macerator pump, 12 V / 24 V, for the Flexi and Design lines. Outside North America. |
| Pump assembly | T-PF.P109 · T-PF.P871 | — | MAC 11 with AC motor, 230 V / 110 V, for toilets with a mains plug and solenoid valve. |
| Pump assembly | T-PF.P136 · T-PF.P1372,3 | — | North American numbers for the MAC 11 with discharge hose, 12 V (40 A fuse) / 24 V (30 A); per Defender for Silence, Silence Plus, Silence Plus 2G, Elegance 2G, X-Light, Evolution and Breex. |
| Pump assembly | T-PF.P01C · T-PF.P01D4 | — | MAC 4 macerator pump with short discharge hose, 12 V (30 A fuse) / 24 V (20 A): Compact line, i.e. Nano, Compass and EasyFit. One source (Defender). |
| Service kit | T-PF.P50-2G1 | — | Complete 2G rubber kit: syphon hose T-PF.P13/A-2G, discharge hose with air admittance valve T-PF.P29/A-2G and double duckbill valve T-PF.P86. Flexi 2G only; Tecma’s recommended spare to renew the toilet completely. |
| Hose | T-PF.P29/A-2G · T-PF.P13/A-2G1,3 | — | Flexi 2G internal hoses: discharge hose with the integrated air admittance valve / syphon hose. They do not fit first-generation Flexi toilets. |
| Pump outlet valve | T-PF.P861 | — | Double duckbill one-way valve in the discharge, stops backflow from the discharge line; in kit T-PF.P50-2G. |
| Pump outlet valve | T-PF.P301 | — | Flap-type one-way valve (clapet) for first-generation Flexi toilets only, supplied on request. |
| Flush water nozzle | T-PF.P03/B · T-PF.P03/P · T-PF.P03/N1 | — | Flush water nozzle on the ceramic, white / bone (pergamon) / black. |
| Flush water nozzle | T-PF.P03B/B · T-PF.P03B/P · T-PF.P03B/N1 | — | Nozzle with bidet shower function, white / bone / black, for toilets with the integrated bidet. |
| Flush switch / switch panel | T-PF.P11B · T-PF.P111,5,6 | — | All-in-one SFT panel with the controller built in: 1 button (FLUSH, refills afterwards) / 2 buttons (BEFORE USE, AFTER USE). |
| Flush switch / switch panel | T-PF.P11M21,6,7 | — | Multiframe SFT, 2 buttons, with separate controller; supplied in a BTicino Living Light frame and fits other common switch frames. Replaces the old Multiframe 1P. |
| Flush switch / switch panel | T-PF.P11T2 · T-PF.P11T2B · T-PF.P11TEB1,8,6 | — | Touch SFT Multifunction glass panel with controller, white / black; Touch Eko SFT, black. |
| Flush switch / switch panel | T-PF.P11T2/SFT-WS · T-PF.P11T2B/SFT-WS1 | — | Touch SFT wall switch alone, white / black, when the controller is fine. |
| Control unit | T-PF.P11T2/SFT-CTR1 | — | Touch SFT controller alone (the box in or behind the toilet). |
| Fresh-water solenoid valve | T-PF.P14/V · T-PF.P15/V1 | — | Invensys solenoid valve (VAI kit), 12 V / 24 V, ½ in female threads, with a filter inside. Adapter T-PF.P89 mounts it inside the toilet. |
| Fresh-water solenoid valve | T-PF.P12/V · T-PF.P47/V1 | — | Invensys solenoid valve for AC toilets, 230 V / 110 V. |
| Raw water pump | T-PF.P27 · T-PF.P281,9 | — | Inlet pump for raw-water systems, 12 V / 24 V (fuse 8 A / 4 A), 12 l/min at 3 bar; fit a strainer ahead of it and mount it dry, horizontal or with the pump head down. |
| Fastening kit | T-8961,10 | — | Floor fixation bracket kit for Flexi 2G and the Design line (not X-Light and Evolution, which have their own kits). Does not fit first-generation Flexi toilets. |
| Mounting bracket | T-PF.P32 · T-PF.P32/B · T-PF.P32/C · T-PF.P32/EVO1 | — | Macerator hardware mounting kit (stainless bracket, shock absorbers, screws): Flexi standard and Flexi 2G high versions / Flexi 2G Short versions and Privilege / Breeze and E-Breeze / Evolution. |
| Seat & lid | T-278TBFR · T-278TPFR · T-278TNFR1 | — | Silence Plus and Silence Plus 2G: thermoset seat and lid with soft-close and front quick release (the 2G standard), white / bone / black. |
| Seat & lid | T-278 · T-278C · T-278N · T-278FR1,3 | — | Silence Plus and Silence Plus 2G: polyester seat and lid, white / bone / black; T-278FR is the white polyester seat with soft-close. |
| Seat & lid | T-236TBFR · T-236TPFR · T-236TNFR1 | — | Elegance and Elegance 2G: thermoset seat and lid with soft-close and front quick release, white / bone / black. |
| Seat & lid | T-236 · T-236C · T-236N · T-236FR1 | — | Elegance and Elegance 2G: polyester seat and lid, white / bone / black; T-236FR is the white polyester seat with soft-close. |
| Hinge set | T-596 · T-PF.P83 · T-630 · T-10051 | — | Silence Plus hinges: polyester seat / polyester seat with soft-close / thermoset seat / the newer thermoset seat with soft-close. |
| Hinge set | T-596 · T-PF.P84 · T-630 · T-10061 | — | Elegance hinges, in the same order; T-596 and T-630 are shared with the Silence Plus. |
| Holding-tank level sensor | T-PF.P0711 | — | Single pneumatic tank sensor (pressure switch) in the black-water tank; shows tank full on any SFT panel. |
| Holding-tank level sensor | T-PF.P81 · T-PF.P8211,3 | — | Mirus field-effect sensors for the Design and Flexi lines, stuck to the outside of the tank: full / mid level (the mid level needs the Touch SFT). |
| Vent valve | T-PF.P08 · T-PF.P0411 | — | Inlet ventilation valve for a siphon break in the ¾ in (20 mm) flush line / outlet ventilation valve for the 1½ in (38.5 mm) discharge line. The loop itself is not included. |
| Service kit | T-PF.P54 · T-PF.P561 | — | Prestige (first generation): rubber kit / general repair kit. |
| Control unit | T-PF.P49 · T-PF.P261 | — | Prestige programmer (control unit), 12/24 V / 230 V. |
Numbers checked against the sources below on 23 October 2026. Always confirm against your serial number and exact type before ordering.
Service intervals
| Task | Interval |
|---|---|
| Strainer clean | Periodically and before winter: clean the filter inside the solenoid valve and the strainer ahead of the inlet pump; refit the solenoid fittings with their gaskets at 2 N·m without forcing the valve1,12,10 |
| Fresh-water wash | Periodically and before winter: run a few flush cycles with clean water. Clean only with mild products: vinegar, acetone, trichlorethylene, solvents and household bleach harm the rubber parts, gels and foams can block the vent valves1,13,10 |
| Winterising | Before frost: drain the whole supply and discharge system, or fill it with a suitable antifreeze; never automotive antifreeze or windscreen-washer fluid. The Compass manual allows only non-toxic propylene-glycol antifreeze1,13 |
| Hoses & clamps | Frequently: check that every hose joint to a seacock has two stainless clamps and that they are tight. Replace sanitation hoses when a damp cloth rubbed on them smells, and then all lines at once1,13,10 |
From the Tecma manuals for the Design and Flexi line, the Compact line and the Compass Eco. Tecma gives no hour or calendar intervals: its manuals say the toilets need no special maintenance or winterisation and list only the periodic and pre-winter jobs above. There is no seal kit to renew as on piston-pump heads; the hoses, the duckbill valve and the pump are changed when they fail, so Tecma recommends carrying a spare pump of the right voltage, a rubber kit, a solenoid valve or inlet pump and a control panel.
Specifications
| Models | Flexi line 2G: Silence Plus 2G and Silence Plus 2G Short, Elegance 2G and Elegance 2G Short, Elegance 2G Cut and Cut Short, matching bidets, and a 48 V version; first-generation Flexi line: Silence Plus, Elegance, Elegance Cut, Prestige, Saninautico; Compact line: Nano, Compass High and Compass Short (Eco versions with rocker switch); Design line: X-Light, Evolution, Evolution Plus, Breex and E-Breex11,14,10 |
|---|---|
| Type | Vitreous-china toilet with the macerator pump built into the base: steel blades in a chamber ahead of the impeller grind the waste, a double duckbill valve in the discharge stops backflow. Flush water from the pressurised fresh-water system through a solenoid valve, or from the sea through a separate inlet pump1,15 |
| Years built | First-generation Flexi line built until 2016 and phased out in 2016–2017; Flexi line 2G since then. Thetford promised spares for the first generation for 10 years14,10 |
| Voltage | 12 V or 24 V DC; Flexi and Design toilets also with a 110 V or 230 V AC motor, then only with a solenoid valve because the inlet pump is DC only; the Compact line (Nano, Compass) is 12/24 V only1,11 |
| Breaker / fuse | MAC 11 (Flexi, Design): 40 A at 12 V, 30 A at 24 V, 8 A at 110 V, 5 A at 230 V; MAC 4 (Nano, Compass): 30 A at 12 V, 20 A at 24 V (the Compass Eco manual gives 30 A for both); inlet pump 8 A at 12 V, 4 A at 24 V. Each toilet on its own fuse or breaker1,11,13,12 |
| Power cable size | MAC 11: at 12 V 4.17 mm² (11 AWG) up to 2 m from the source and 6.63 mm² (9 AWG) beyond, at 24 V 2.63 mm² (13 AWG) / 4.17 mm² (11 AWG), AC 0.82 mm² (18 AWG). Compact line: 12 V 10, 8 or 6 AWG and 24 V 16, 14 or 12 AWG for runs of 0–6, 6–10 and 10–15 m. Lengths count positive and negative wire1,11,13 |
| Suction / discharge head | MAC 11: up to 11 m vertical and 90 m horizontal; MAC 4: 4 m vertical, 40 m horizontal. Nominal values: every 90° bend costs head. The Compact line manual allows a rise of up to about 1.8 m (6 ft) to the holding tank without loss of performance1,11,12 |
| Flow rate | MAC 11 macerator: up to 270 l/min; inlet pump: 12 l/min at 3 bar (45 psi)1,11 |
| Flush water | Flexi line 2G: 0.5–2.7 l per flush; Nano and Compass: 0.5–2 l. Set with the trimmer on the back of the SFT panel (clockwise = more water) so that the water stands about 1 cm above the ceramic outlet; on the Touch panel BEFORE USE opens the solenoid for at most 12 s11,1 |
| Inlet hose | Flexi and Design: 20 mm barbed fitting on the toilet; solenoid valve with ½ in female thread at both ends, recommended system pressure 3 bar. Nano and Compass: ½ in supply line for fresh water, ¾ in for raw water1,12,13 |
| Discharge hose | 38 mm (1½ in) ID onto the male duckbill outlet; Tecma recommends DN 40 hose or pipe (reinforced, PVC or odour-proof sanitation hose). DN 32 works but makes the pump work harder1,10,13 |
| Power consumption | Solenoid valve: 9.5 W (12 V), 10 W (24 V), 6 W (110/230 V)1,11 |
| Dimensions | H × W × D: Silence Plus 2G 460 × 390 × 510 mm (Short 360 mm high), footprint 405 × 280 mm; Elegance 2G 460 × 370 × 430 mm (Short 360 mm high), footprint 390 × 280 mm; Elegance 2G Cut 460 × 370 × 430 mm with a 10° back, footprint 310 × 280 mm; Nano 295 × 370 × 446 mm; Compass 445 × 365 × 485 mm (Short 365 mm high)11,6 |
| Weight | Silence Plus 2G 25.5 kg (Short 23.5 kg); Elegance 2G 22.5 kg (Short 19.5 kg); Elegance 2G Cut 22 kg (Cut Short 19 kg); Nano 17.6 kg; Compass 21.5 kg (Short 19.5 kg); Silence Plus 2G bidet 16 kg (Short 14 kg)11 |
| Sizes | Silence Plus 2G is the ‘big bowl’ (51 cm deep), Elegance 2G the ‘small bowl’ (43 cm). Short versions stand on a step of about 10 cm: the 36 cm ceramic then gives the usual 46 cm seat height. On the Short deep-bowl versions the motor reaches 100 mm below the bowl; the Elegance 2G Short shallow bowl has everything inside11,1 |
| Mounting | Flexi 2G and Design: against the wall on nylon floor brackets with side screws (kit T-896, template supplied), side screws at most 2.5 N·m, sealant around the base. Nano and Compass: two ¼ in stainless lag screws through the plastic inserts into a floor at least ¾ in (19 mm) thick; seal with silicone, not polysulfide1,12,13 |
| Control | SFT panels (Smart Flush Technology): All-in-one SFT with 1 button (refills after the flush) or 2 buttons (BEFORE/AFTER USE) and the controller built in; Multiframe SFT for standard switch frames; Touch SFT Multifunction with sailing and mooring modes; Touch Eko; Nano and Compass also with the simple Eco rocker switch. Tank-full input 7 V for a Tecma pneumatic switch, a Mirus field-effect sensor on the outside of the tank (wall up to 10 mm) or any dry contact1,11,12 |
| Material | Vitreous china from the Civita Castellana ceramics district in Italy; on the Flexi 2G the standard seat and lid are thermoset with soft-close (Sugatsune damper) and front quick release, polyester-coated wood is an option; white, black or bone depending on model1,11 |
| Warranty | 2 years from the boat’s registration for the toilet, 2 years from purchase for spare parts; claims through an authorised Tecma service centre with the registration or invoice1,16 |
Good to know
- Know the generation before ordering hoses or brackets: the Flexi 2G (from 2016) has the air admittance valve built into its discharge hose and takes rubber kit T-PF.P50-2G and floor kit T-896, and neither fits a first-generation Silence Plus or Elegance, although footprint and outer dimensions are the same. Seats and lids (T-278… for the Silence Plus, T-236… for the Elegance) fit both generations.10,1
- Old control panels are no longer made. Thetford’s replacements: Multiframe 1P → Multiframe SFT 2P (T-PF.P11M2); Argent 1P/2P and Touch 1P/2P → Multiframe SFT 2P or Touch SFT Multifunction; Premium → Touch SFT Multifunction; for the Premium Plus ask Thetford.7,10
- Toilets sold in North America carry other part numbers: there the MAC 11 is T-PF.P136 (12 V) or T-PF.P137 (24 V) with hose, instead of T-PF.P01A/P01B. Their model code tells you toilet and voltage: T-S2G… is a Silence Plus 2G, T-COM… a Compass, T-NAN… a Nano, followed by 012 or 024 for 12 or 24 V.1,2,6,17,4
- Weak or slow flushing is often low voltage: the supply should stay at 12 V ± 2 V (24 V ± 2 V) and drop no more than 10 % while the macerator runs. That needs the heavy cables from the wiring chart and a fuse or breaker for each toilet.13,1
- If the bowl stops filling but the pump still runs, look at the tank LED: when the sensor reports a full holding tank, the SFT panel blocks the water. On the Touch SFT, pressing both buttons twice about 1 s apart overrides the block, holding both for 3 s and releasing when the lock LED flashes runs the macerator alone (holding on to 5 s switches between sailing and mooring mode), and holding the centre LED for 10 s resets the panel.1,12
- With a raw-water inlet pump, remember that the pump is not a check valve: water can flow through it when it is stopped. If the toilet can ever sit below the heeled waterline, a vented loop high enough above it is mandatory in the flush line, and the seacocks should be closed whenever the boat is left.1,13
Videos & how-tos
Links to YouTube, nothing embedded. The maker’s own channel comes first; the rest are channels we found clear and correct for this model.
- How the Tecma macerator system works Video Thetford Marine Tecma · maker’s channel · EN · 3 min
- Setting up a Tecma toilet system Video Thetford Marine Tecma · maker’s channel · EN · 2 min
- Replacing the macerator pump on a Tecma toilet Video Thetford Marine Tecma · maker’s channel · EN · 4 min
On the marketplace
Looking for a part for Tecma electric toilets? Post a wanted ad in the app — it is free, it sits on the live map, and boaters nearby who have the part aboard can answer.
Got spares you no longer need? List them in a minute. No commission, ever.
Sources
- dropbox.com/scl/fi/ep95wpmvpcg5cay7184j6/Design-Flexi_Line_Installation-User-Manual_ITA-E…
- defender.com/en_us/thetford-tecma-mac-11-macerator-pump-and-hose
- fisheriessupply.com/thetford-tecma-silence-plus-toilet-parts
- defender.com/en_us/thetford-tecma-mac-4-macerator-pump-and-hose
- defender.com/en_us/thetford-tecma-all-in-one-sft-flush-control-panel
- defender.com/en_us/thetford-tecma-silence-plus-2g-toilet
- thetfordmarine.com/service/tips/
- defender.com/en_us/thetford-tecma-touch-sft-flush-control-panel
- navstore.com/products/thetford-raw-water-inlet-pump-12v-t-pf-p27
- thetfordmarine.com/service/faq/
- dropbox.com/scl/fi/eehhvnxj1or0s02p3zlnr/Thetford-Marine-Catalog_ROW_2025_LR.pdf?rlkey=fq…
- dropbox.com/scl/fi/l1jtsa5eghoev2954y1q8/Compact-Line-Manual_Controller-SFT_V4_IT-EN-DE-F…
- dropbox.com/s/96inq3ph5va0ucv/Compass%20High%20and%20Short_ROW.pdf?raw=1
- thetfordmarine.com/service/downloads/
- thetfordmarine.com/how-it-works-flexi-and-design-line/
- thetfordmarine.com/service/warranty/
- fisheriessupply.com/thetford-tecma-compass-eco-tall
Tecma is a trademark of its owner; boatparts.app is not affiliated with it. Part numbers are quoted for identification only. Spotted an error? Write to mail@boatparts.app.